We sell, install and service Walk-In-Tubs manufactured byMediTub, Best Bath Systems, Rane Tubs, AquaEze, and Access Walk-In Baths. We have one store located in Portland, Oregon at 12833 NE Airport Way on the north (river) side of Airport Way next to BedMart, and 3 miles from the Airport. We have on display in our showroom 9 different Walk-In Bath Tubs; 5 MediTub Bath Tubs; 1 Best Bath Systems Tub; 1 Rane Tub; 1 AquaEze Tub, and1 Access Walk-In Baths Tub. Our walk-in tubs are designed to fit in the space of the standard tub or shower in your home. The tub door seals have lifetime guarantees against leakage. MediTub Walk-In-Bath Tubs. MediTub's walk-in bath tubs are accessible and comfortable. MediTub specializes in accessibility and security. Safe transfers in and out of the bath are the most critical part of bathing safely. That is why MediTub offers standard features such as a safety grab bar and an ADA compliant 17" high seat to assist in entering and exiting from the bath.   MediTubs walk-in baths are constructed of the highest grade fiberglass composites for beauty and durability. They come with a stainless steel frame for long lasting strength and adjustable feet for easy installation and leveling. Available options include a Whirlpool System and/or an Air System. Available colors are White and for some models Biscuit. The Whirlpool System includes a pneumatic control for the pump, a 1 HP electric water pump motor, 6 adjustable water jets, and a Tee heater. All of the water massage jets have a 360 degree range of motion to provide maximum comfort and versatility. The Tee heater is designed to maintain water temperature during water jet operation, and will not heat cold water to desired bathing temperature. The Air System includes a pneumatic control for the pump, a 1 HP electric air pump motor, a 300 watt air jet blower with a 600 watt heater, and 16 air jets. MediTub provides a lifetime warranty on the door seal for the original owner. There is a 10 year limited warranty on the tub. Call toll free at 800-944-4935 or 503-255-5005.  The M3238 is 32" x 38" x 38", and is an acryllic tub with an outward swinging door. The M3238 includes the following standard features:
 The M3053 is a fiberglass composite tub with the following dimensions and features:
30 x 60 x 18 in. step in tub SI3060 series  The SI3060 is a Step in Tub. It is uniquely designed to allow you to keep the existing layout of your bathroom. It features an advanced watertight, walk-in tub door system for easy access. You can lie back and be fully immersed in a whirlpool while relaxing in the salubrious experience. The open interior of the tub is free of any seat which allows for a flat, full bodied submersion. Made of reinforced acrylic, it includes a stainless steel frame for long lasting strength which is adjustable for easy installation and leveling. Go Ahead! Take the plunge and enjoy a luxurious bathing experience!  Available in configurations: Deluxe Hydro or Air. •Deluxe Hydro massage system one horse power pump with directional water jets. The Deluxe whirlpool massages system includes twelve 360° directional water jets. Each individual water jet is also fully adjustable as far as pressure or velocity of water. Hydro system includes Inline Heater rated at 15 Amps 125 Volts AC, 1 Nema Plug. Other MediTubs are shown below:    Best Bath Systems Escape & Escape Plus walk in bath tub "the accessible bathtub". Call toll free at 800-944-4935 or 503-255-5005. Designed with safety and convenience in mind, the Escape and Escape Plus represents a product you can rely on. With more than 35 years of experience, Best Bath Systems is known for providing accessible walk in bath systems that surpass industry standards for installation ease and reliability. All Best Bath Systems products are designed, engineered and manufactured in Boise, ID.  The unique walk-in door is designed to eliminate the need of stepping over the traditional bathtub barrier. The door seal comes with a lifetime guarantee against leaks. If the door ever leaks, we will replace the seal at no cost to you. The Escape and Escape plus are both designed to fit in the same space as your current tub or shower. No need to move existing walls. The surround kits are available in a two-wall 50 inch space saving version or the typical three-wall 60 inch size with same footprint as your standard bathtub.  Rane Walk-In-Bath Tubs Rane Tubs was established by Norcom of TN, Inc. to provide high quality, user-friendly products for bathing. Norcom has been a leading manufacturer of composite products for a wide range of applications. These include products for the health care industry since its establishment in 1990. Call toll free at 800-944-4935 or 503-255-5005. The RH6 is a freestanding tub with a low threshold door to enable easy entry and exit with or without a transfer device. With its full front and side panels, it can be installed either against a wall or in a corner. With the contoured interior, a bather can sit comfortably in a slightly reclined position. It comes standard with a faster flowing 1 ½” stopper drain and overflow. Model RH 6 is a freestanding, side access tub designed to fit against a wall or in a corner.    Options:
Technical Specifications for all Rane Tubs. Construction: The tub shell is a seamless 3/16” thick reinforced polyester composite laminate with an ISO/NPG sanitary gel coat surface. Critical areas are reinforced using ¼” thick end grain balsa and additional layers of reinforced laminate. The base is an integrated part of the structure and adds support to the seat and floor areas. Leveling Legs: The sturdy stainless steel leveling legs will adjust up to 2” each. Drain and Overflow Assembly: An ample 1-1/2” stopper style drain comes standard. Manufacturing and Testing: This unit was designed and is manufactured in Sparta, Tennessee USA. Each unit is passed through quality control review and is completely water tested prior to being shipped. Warranty: All Rane Tubs come with a standard five year limited warranty on external finishes and fiberglass shell, a three year limited warranty on specified parts, and a lifetime warranty on the door seal. |
| Phone: 503-255-5005 --- toll free 800-944-4935 Email: sales@AllinOneMobility.com (click here)    All In One Mobility, Inc. --- 12833 NE Airport Way, Portland, OR 97230  All In One Mobility, Portland; we sell and service wheelchair vans, handicap baths, mobility scooters, walk in baths, van conversions, ada bath units, electric wheelchairs, wheelchair van rentals, accessible baths, power wheelchairs, wheelchair lifts, ada shower units, wheelchair ramps, stair lifts, residential elevators, roll in shower units, VMI, northstar, jazzy wheelchairs, handicap vans, pride mobility scooters, accessible vans, lift chairs, mobility vans, wheelchairs, disability vans, walkers, electric scooters, water retainers, van lifts, stair chairs, scooter lifts, portable ramps, modular ramps, hand controls, adaptive driving equipment, and chair lifts. © 2010 All In One Mobility, Inc., Portland, OR 97230, OR CCB#165310 Licensed & Bonded, WA-ALLONOM920KA, DA0843. |